Crdroid Bootimg Install Site

Flashing Android 13 boot.img on an Android 14 crDroid ROM will break keymaster (fingerprint, encryption).

Open the terminal (Linux/macOS) or command prompt/PowerShell (Windows) inside the platform-tools folder. Verify the connection by typing: fastboot devices Use code with caution. If you see a serial number, you are good to go. using this command: fastboot flash boot boot.img Use code with caution.

(Replace the file name with the exact name of the ROM ZIP file you downloaded) crdroid bootimg install

How to Flash and Install crDroid boot.img: A Complete Guide Flashing the custom boot.img kernel file is a critical step when installing crDroid, especially on modern devices with dynamic partitions (A/B partition systems). The boot.img contains the crDroid recovery and the necessary kernel instructions to boot your device.

: Hold Volume Up + Power until the recovery screen appears. Flashing Android 13 boot

: You likely forgot to format data after flashing the ROM, or you flashed a boot.img meant for a different device model. Boot back into fastboot and re-verify your files. Fastboot Devices Shows Nothing

: Your device bootloader must be fully unlocked. If you see a serial number, you are good to go

Note: If you renamed the file, replace boot.img with the actual filename.

: Force-reboot back into Recovery mode using the hardware keys. Perform the Format data/factory reset step again, then re-sideload the ROM. Error: "Cannot read boot.img"