The printhead is mounted too far from the substrate, or the production line speed does not match the printer's internal delay settings.
Set the delay (in millimeters or milliseconds) to control where the code appears on the product. Step 3: Ink Core Priming Go to the Tools > Maintenance menu.
Verify you have the Videojet 1280 cabinet, printhead, umbilical cable, power cord, and standard accessory kit.
With hardware installed, refer to the manual’s “First Start” procedure. videojet 1280 manual pdf install
Videojet does not permit deep linking to PDFs, but go to support.videojet.com , enter “1280” in the search bar, and filter by “Document Type: Installation Guide”. Look for revision “1.7” or newer.
Open the outer shipping carton and remove the accessory box containing manuals, cables, and tools.
Ground all conductive equipment to the building's grounding system using approved cables. Physical Setup: The printhead is mounted too far from the
Adjust the delay value (in millimeters or milliseconds) to move the printed text horizontally to the desired position on your product. 6. Testing the Jet and Calibrating Alignment
Plug the encoder into the dedicated on the I/O panel. 4. Fluid Module Setup & Priming
The printer will automatically read the RFID microchips on the cartridges to verify fluid compatibility and expiration dates. 5. First-Time Power On and Software Configuration Verify you have the Videojet 1280 cabinet, printhead,
Videojet 1280 Setup Guide: Full Manual Installation and Configuration The Videojet 1280 Continuous Inkjet (CIJ) printer Go to product viewer dialog for this item.
The printer cabinet must remain perfectly stable during high-speed production line vibrations. The system supports three distinct Videojet mounting configurations :
“Never swap blue and green lines. Ink will gel inside the make-up line, requiring full fluid system replacement.”
