The Craftsman 82082 is a manual-ranging digital multimeter (DMM) designed for home use, automotive diagnostics, and basic electrical troubleshooting. It is intended for measuring AC/DC voltage, DC current, resistance, and testing continuity and diodes. The user manual emphasizes safety, proper operation, and maintenance.
| Symbol | Meaning | Action Required | | :--- | :--- | :--- | | | Overload / Out of Range | Select a higher range. | | - (negative sign) | Negative polarity | Reverse the test leads. | | Battery Icon | Low battery (<7.5V) | Replace 9V battery immediately. | | AC or ~ | Alternating Current | You are measuring AC Volts. | | DC or ⎓ | Direct Current | You are measuring DC Volts/Amps. | | H | Hold function active | Press HOLD button again to release. | | K, M | Kilo (1,000) / Mega (1M) | Multiply the reading by 1,000 or 1,000,000. |
| Parameter | Range | Accuracy | |-----------|-------|----------| | | 200mV – 600V | ±0.5% – ±1.0% | | AC Voltage | 200V – 600V | ±1.2% | | DC Current | 200µA – 10A | ±1.0% – ±2.0% | | Resistance | 200Ω – 2000kΩ (2MΩ) | ±0.8% – ±1.0% | | Diode Test | Yes (approx. 1mA test current) | – | | Continuity | Audible < ~30Ω | – | | Power | 9V battery (e.g., 6F22 or 1604) | – | | Display | 3.5-digit LCD (max 1999 counts) | – |
Remove the yellow/red protective rubber holster from the unit. craftsman digital multimeter 82082 user manual
The Craftsman Digital Multimeter 82082 is a manual-ranging tool designed for residential electrical troubleshooting, covering AC/DC voltage, resistance, continuity, and diode tests. Rated for CAT II environments, this device utilizes specialized ports for high and low current measurements along with a data hold function. For the full operating instructions, see the user manual cdn.prod.website-files.com/65f01cf76c03552250696a1a/66e509f403cd70fb09fa11a3_57582241331.pdf. Manual Ranging MultiMeter - Sears Parts Direct
Used for most measurements, including voltage (AC/DC), resistance (Ohms), and low-level current up to 200mA .
The user manual also provides information on additional features, including: The Craftsman 82082 is a manual-ranging digital multimeter
This is a quick "go/no-go" test for fuses, wires, and switches.
If the meter fails to measure current (Amps) but voltage works perfectly, the internal ceramic fuse is likely blown. Open the rear case completely by removing all back screws.
Operational Analysis and User Guide: Craftsman Digital Multimeter Model 82082 | Symbol | Meaning | Action Required |
: Used to measure direct current flow in a circuit.
An internal beeper will sound if the resistance is less than approximately 30 Ohms. Current Measurement (Amps) For measurements up to 200mA, use the V/Ohm/mA jack. For measurements up to 10A, use the 10A jack. Set the rotary switch to the appropriate A range.
| Symptom | Likely Cause | Solution | |---------|--------------|----------| | No display | Dead battery | Replace 9V battery | | Incorrect reading | Low battery | Replace battery | | | Wrong range selected | Switch to higher range | | No continuity beep | Broken test lead | Check leads continuity | | Blown fuse (mA range) | Overcurrent | Replace fuse |
" (Overload), the value exceeds the current range and you must switch to a higher setting. Maintenance: Battery and Fuse Battery Replacement : The unit typically uses a 9V battery