The Ultimate Orcad 16.6 Tutorial: From Schematic Capture to PCB Layout
Guide the trace along the board layout to its destination pad and click to place it.
Routing is the process of replacing the logic lines ("rat's nests") with actual copper traces. Setting Up Design Rules (Constraints) orcad 16.6 tutorial
Give the profile a descriptive name (e.g., "Transient_Analysis") and click .
Type the name (e.g., VCC , GND , DATA_0 ) and click on the wire to apply it. Wires with the same alias connect automatically across your design. Step 2: Circuit Simulation with PSpice (Optional) The Ultimate Orcad 16
Go to > Design Parameters > Design tab to set your working units (Mils or Millimeters). Go to Setup > Outlines > Board Outline .
Select the tool icon from the top toolbar or press F3 . Type the name (e
Creating a design in OrCAD 16.6 involves a standard workflow starting from schematic entry to PCB layout and fabrication file generation. 1. Schematic Capture (OrCAD Capture)
Designing printed circuit boards requires precision, reliable software, and a structured workflow. Cadence OrCAD 16.6 remains an industry-standard suite for electronic design automation (EDA). This comprehensive guide walks you through the entire design process using OrCAD Capture and PCB Editor 16.6. Section 1: Introduction to the OrCAD 16.6 Environment
The netlist bundles your connectivity and footprint assignments into files that the layout editor can read. Go to . Ensure the PCB Editor tab is selected.