The is a critical tool if you are facing a temperature or "hot" issue.

Note: If no keys are pressed for 30 seconds, the system will automatically exit programming mode without saving changes.

If your ES3000 display indicates a high-temperature trip, the following causes and solutions are recommended by technical manuals and service guides : ES3000 версия 4

| Parameter | Description | Typical Default Values | |---|---|---| | | Cut-out Pressure (Unload) | 8 bar / 10 bar / 13 bar (depends on model) | | P1 | Cut-in Pressure (Load) | 6.5 bar / 8.5 bar / 11.5 bar (depends on model) | | r2 | Max. Shutdown Temp | 100°C | | c5 | Max. Motor Starts/Hour | 10 | | c6 | Temperature Units | 0 = °C | | c7 | Pressure Units | 0 = bar |

: Ensure the compressor room has improved airflow and that the ambient temperature is not too high.

By maintaining clean coolers, ensuring proper oil levels, and servicing the thermostatic valve components regularly, you can maximize the operational lifespan of your rotary screw compressor and prevent the ES3000 controller from tripping on high-temperature faults. What is showing on your screen? Have you checked if the cooling fan is spinning?

| Section | Title | Why it’s "Hot" | | :--- | :--- | :--- | | | Wiring Diagram | Power loss? Loose sensor? Fix here. | | Page 12 | Parameter List P01 to P55 | Factory reset codes. | | Page 18 | Alarm Codes E01 – E20 | E02 = Fan overload (Hot motor). | | Page 22 | Temperature Calibration | Fixing "High Temp" shutdowns. | | Page 30 | Quick Start Guide | Setting up a brand new unit. |

Shows real-time system pressure measured by the pressure transducer.

The PDF manual devotes a specific chapter to the (for cold climates or high-ambient factories). If you are in a desert or a refrigerated warehouse, follow these calibration steps from Section 7.2 of the manual.

Es3000 Compressor Controller Manual Pdf Hot -

The is a critical tool if you are facing a temperature or "hot" issue.

Note: If no keys are pressed for 30 seconds, the system will automatically exit programming mode without saving changes.

If your ES3000 display indicates a high-temperature trip, the following causes and solutions are recommended by technical manuals and service guides : ES3000 версия 4 es3000 compressor controller manual pdf hot

| Parameter | Description | Typical Default Values | |---|---|---| | | Cut-out Pressure (Unload) | 8 bar / 10 bar / 13 bar (depends on model) | | P1 | Cut-in Pressure (Load) | 6.5 bar / 8.5 bar / 11.5 bar (depends on model) | | r2 | Max. Shutdown Temp | 100°C | | c5 | Max. Motor Starts/Hour | 10 | | c6 | Temperature Units | 0 = °C | | c7 | Pressure Units | 0 = bar |

: Ensure the compressor room has improved airflow and that the ambient temperature is not too high. The is a critical tool if you are

By maintaining clean coolers, ensuring proper oil levels, and servicing the thermostatic valve components regularly, you can maximize the operational lifespan of your rotary screw compressor and prevent the ES3000 controller from tripping on high-temperature faults. What is showing on your screen? Have you checked if the cooling fan is spinning?

| Section | Title | Why it’s "Hot" | | :--- | :--- | :--- | | | Wiring Diagram | Power loss? Loose sensor? Fix here. | | Page 12 | Parameter List P01 to P55 | Factory reset codes. | | Page 18 | Alarm Codes E01 – E20 | E02 = Fan overload (Hot motor). | | Page 22 | Temperature Calibration | Fixing "High Temp" shutdowns. | | Page 30 | Quick Start Guide | Setting up a brand new unit. | Shutdown Temp | 100°C | | c5 | Max

Shows real-time system pressure measured by the pressure transducer.

The PDF manual devotes a specific chapter to the (for cold climates or high-ambient factories). If you are in a desert or a refrigerated warehouse, follow these calibration steps from Section 7.2 of the manual.