E07-m1101d Pinout |verified| -

. Connecting to a 5V source without level shifters will likely destroy the CC1101 chip. Antenna Importance:

Further research is needed to fully explore the capabilities and limitations of the E07-M1101D pinout. Some potential areas of investigation include:

The E07-M1101D module has a standard . Identifying pin 1 is crucial. When looking at the module from the top side where the components are mounted, pin 1 is located on the lower-left corner .

The Raspberry Pi uses 3.3V logic, making it a perfect match for the E07-M1101D. Connect the SPI pins to the Pi's hardware SPI interface (e.g., pins 19 (MOSI), 21 (MISO), 23 (SCLK), and 24 (CE0)), after enabling SPI in the raspi-config tool. e07-m1101d pinout

Below is the accurate pinout for the e07-m1101d as viewed from the (component side) with the antenna pad or U.FL connector facing away from you.

Whether you are building a smart home sensor network or experimenting with RF remote controls, the E07-M1101D and its clear pinout will serve as a reliable foundation. Keep the above tables and tips handy, and you will be set up for success.

While the Arduino Uno operates at 5V logic, the E07-M1101D is a 3.3V device. You must use a on the SPI lines (CSN, SCK, MOSI). The MISO line from the module is 3.3V, which the Uno can typically read as HIGH, but a level shifter is still recommended for safe and reliable operation. The Raspberry Pi uses 3

If using a wire antenna, solder a 17.3 cm wire (for 433 MHz) or 8.2 cm wire (for 868/915 MHz) to the ANT pad. Do connect an antenna directly to any of the numbered pins 1–10.

Configurable I/O pins for status, with GDO0 often used for interrupts. Application Example: Arduino Mega

// Set output power ELECHOUSE_cc1101.setPA(10); the E07-M1101D is a 3.3V device.

The recommended working parameters are:

The module is strictly 3.3V. Providing 5V to the VCC pin will damage the CC1101 chip. Ensure a stable supply.

Users from the Arduino Community and Home Assistant forums highlight the E07-M1101D-SMA as a superior choice over generic CC1101 "green modules". ✅ The Good E07-M1101D-SMA User Manual - Ebyte