Now instruct the remote AnyDesk app to listen for remote wake signals: How to turn on PC by Wake on Lan in AnyDesk
Check and Only allow a magic packet to wake the computer . Configure AnyDesk Settings: Open AnyDesk on the computer you want to wake. Go to Settings > Wake-on-LAN . Ensure the feature is enabled.
IT professionals can turn on client machines to perform maintenance outside of work hours. Prerequisites for AnyDesk Wake-on-LAN
You must enable "Wake on LAN," "Power on by PCIe," or "Resume by LAN" in your computer's BIOS. wake on lan anydesk hot
Before your operating system even loads, your hardware needs to know it’s allowed to wake up. Access BIOS : Restart your PC and tap during startup. Enable WoL
or an old Android phone always online in the office/home to act as this trigger. Essential Setup Checklist
: Look for a "Power Management" or "Advanced" tab. Enable settings like Wake-On-LAN Resume on LAN Power on by PCI-E/PME Save and Exit to save these settings and reboot. AnyDesk Help Center 2. Windows Settings (Target PC) Now instruct the remote AnyDesk app to listen
Wake-on-LAN (WoL) allows a computer to be powered on remotely by sending a "magic packet" (a specific Ethernet broadcast frame). AnyDesk does not natively send WoL packets, but you can integrate WoL using a secondary device (router, Raspberry Pi, another PC, or a cloud service) to wake the target machine before connecting via AnyDesk.
Before your network card can accept power signals while the PC is turned off, the motherboard must be instructed to maintain standby power to the PCIe and Ethernet slots. Wake up a device remotely - AnyDesk Help Center
AnyDesk bypasses this hurdle using a proxy-based architecture: Ensure the feature is enabled
As described in the How It Works section, AnyDesk's WoL is designed to work over the internet right out of the box, as long as you have another device on the same local network as the sleeping PC that is awake, online, and has AnyDesk running. This is the .
Setting up with AnyDesk allows you to power on a remote computer from a "sleep" or "off" state, provided at least one other AnyDesk-enabled device is active on the same local network. 1. Enable Hardware Support (BIOS/UEFI)