The Baymak Lambert LX 24 Fi Go to product viewer dialog for this item.
The system pressure should be on the pressure gauge (located at the bottom right of the boiler). If the pressure drops below 0.8 bar, you will see an E10 error code (low pressure). To top up the water:
| Display/Icon | Meaning | |--------------|---------| | 🔥 HOT (solid) | Central heating mode active, burner on | | 🔥 HOT (flashing) | Post-circulation or waiting (no demand) | | 🚿 Tap symbol (solid) | Domestic hot water (DHW) mode | | 🌡️ Solid bar segments | Current temperature / power level | lambert lx 24 fi instrukcia hot
Given these reports, an extended warranty or a service plan might be a worthwhile investment for peace of mind.
3-star energy efficiency rating according to 92/42/EEC standards. The Baymak Lambert LX 24 Fi Go to
Rated with 3-star energy efficiency according to European CEE/92/42 standards. Essential Operating Instructions
A: This is almost always caused by a leak somewhere in the heating system – either at a radiator valve, a pipe joint, or inside the boiler itself. If you cannot find any visible leaks, call a technician to pressure-test the system and repair the leak. To top up the water: | Display/Icon |
– do not store flammable materials or block the ventilation openings.
The boiler stops working because the system pressure is too low.
If the PDF is not found in English, the Slovak version “Návod na obsluhu” contains identical diagrams. Look for sections labeled “Poruchy a ich riešenia” (Faults and solutions) – subheading “Prehriatie” (Overheat).