If you can't find your brand's code or the direct entry method doesn't work, you can use the auto-search feature. This method scans through all the codes in the remote's memory until it finds one that works. This process can take a few minutes.
Hold the key until the red indicator light turns on and stays solid. Enter the for your brand using the number pad. The indicator light will turn off if the code is accepted.
Are you currently stuck on a or code?
for approximately 6 seconds until the code numbers on the LCD screen begin to flash. Use the "TEMP +" and "TEMP -" buttons
The Articco TH-MSUR-40 is a universal remote control designed to operate multiple devices. Here are some key features and instructions on how to use it: manual controle universal articco th-msur-40
Press and hold the (or Set ) button for approximately 3 seconds until the numeric code digits on the bottom-right of the LCD display begin to flash.
If the remote powers on your air conditioner but fails to adjust fan speeds or direct the automated swing flaps, you have paired a partial code match. Restart the Automatic Code Search process and scan past that digit block until you find a code that supports all systemic sub-features. If you can't find your brand's code or
Press the button to lock the code in. The display numbers will stop flashing.
Immediately on the remote control keypad to freeze the scanning process and lock in the active code value. Method B: Manual Entry Using Code Profiles Hold the key until the red indicator light
Press and hold down the or Set button for roughly 5 to 6 seconds. Release the button once the code numbers on the LCD begin scanning rapidly.