is a critical component in automated conveyor lubrication systems, designed to ensure precision oiling, reduce maintenance downtime, and optimize lubricant consumption. As an authorized distributor, LubeCon USA highlights that these controllers allow for millisecond-level programming, enabling highly precise applications of lubricant to conveyor chains.
: Utilize the "push-to-connect" terminal strips for simplified electrical installation. Programming :
Power on the controller with the lubricant supply valve closed. Manually advance the conveyor chain and verify that the sensor LED flashes precisely when a target pin passes the sensor head.
Inspect external wiring harnesses for fraying or heat damage.
Place a clean piece of cardboard directly under the injection nozzle. Trigger a manual test shot from the controller. Observe the impact zone of the fluid. Adjust the physical nozzle bracket until the fluid strikes the exact gap between the chain link sideplates. 5. Maintenance, Diagnostics, and Troubleshooting
The controller is distinguished by its user-friendly interface and robust industrial design:
The duration of the pause phase between lubrication events.
The controller initiates a lubrication cycle after a set number of operating hours.
The Advanced System Controller operates on precise timing cycles based on either or Count Mode . Navigation Menu
Refer to manual Table 4-1. For a typical 8-port divider valve, set Pulse Timeout to 1.5x the longest measured cycle time.
