Jungheinrich Etv 216 Error Codes |work| Jun 2026

Basic resetting of codes only works for temporary glitches. To truly master , you need access to the proprietary diagnostic software.

: Hydraulic function (lift/tilt) activated during startup. Technical System & Component Faults

4. Communication and Controller Errors (E-Codes or 500+ Range)

The ETV 216 is highly sensitive to battery health, especially with 80V or 48V lead-acid or lithium systems. jungheinrich etv 216 error codes

to the safety switch or replace the switch if it’s faulty. Error 1901.1 (Drive Pedal at Startup)

Check battery connections for weak contact, check battery voltage, and ensure the charger is disconnected. Inspect the main contactor wiring. 018-1 / 018-4 (Armature Power Stage Fault):

Immediately park the forklift on a level surface. Lower the forks completely to the floor and engage the parking brake. Basic resetting of codes only works for temporary glitches

Walk around the truck to check for mechanical obstructions, fluid leaks, or smoking components. When to Call a Certified Jungheinrich Technician

Voltage drops, thermal overloads, or CAN-bus communication breaks. Common Jungheinrich ETV 216 Error Codes and Meanings

The main controller detects an incorrect current at a hydraulic solenoid valve. Technical System & Component Faults 4

One of the 3 phases cannot be switched on, or the armature power stage is damaged.

Ultimate Jungheinrich ETV 216 Error Codes Guide: Troubleshooting & Fixes

If you are seeing a specific error code not listed here, please provide the number for a more tailored troubleshooting guide.