Drone Manual [work] | Skyrex

Push LEFT/RIGHT to rotate the drone on its axis (turn left or right). Push UP/DOWN to fly forward or backward. Push LEFT/RIGHT to bank or fly sideways. Takeoff and Landing

The drone's LEDs will change from flashing to solid, indicating a successful connection. Gyroscope Calibration

Push UP/DOWN to control altitude (climb/descend). Push LEFT/RIGHT to rotate the nose of the drone horizontally.

This comprehensive manual provides step-by-step instructions to safely set up, calibrate, fly, and maintain your Skyrex Drone. 1. Package Contents and Anatomy skyrex drone manual

Before attempting your first flight, verify that your packaging contains all standard components. Lay the items out on a clean, flat surface to inspect for any shipping damage. Unboxing Checklist (1x) Ergonomic Remote Controller (1x)

Open the downloaded app and press to see the live camera stream. 7. Maintenance, Storage, and Troubleshooting

Push both control sticks simultaneously downward and inward (a V-shape configuration) to start the motors. Push the left stick upward slowly to ascend. Push LEFT/RIGHT to rotate the drone on its

Point the drone's nose directly upward toward the sky and rotate it 360 degrees vertically around its axis.

Pull both joysticks down and inward toward each other (V-shape arrangement) to manually arm the motors. Once the propellers idle, gently push the left joystick up to ascend.

Draw a flight path on the app's interactive map. The drone will fly the designated route smoothly while you focus on controlling the camera. Takeoff and Landing The drone's LEDs will change

What specific are you focusing on right now?

Optical flow positioning sensor, infrared altitude sensors, and landing gear. 2. Pre-Flight Preparation

Place on flat surface. Short press + long press drone’s power button. Rear LEDs flash slowly.