Set the Connection Method to (do not select USB).
Download the (often labeled as FT232R or VCP - Virtual COM Port driver) or the CH340 Driver , depending on your chipset.
Ensure sequential transmission parameters match the standard Redsail hardware values: 9600 Data Bits: 8 Stop Bits: 1 Parity: None Flow Control: Hardware or Xon/Xoff SignMaster Configuration Open SignMaster and open the Connection Manager . Add your Redsail plotter model. Set the Connection Type to Direct COM Port . redsail cutting plotter usb driver install
But the machine was silent. Dead.
Plug the USB cable into a USB 2.0 port on your computer (avoid USB 3.0 blue ports, as they cause communication lag with older plotters). Turn on the power switch on the Redsail cutting plotter. Set the Connection Method to (do not select USB)
Connect your Redsail plotter to your computer via USB, turn the plotter power on, then open Device Manager on your Windows PC (right‑click the Start button and select “Device Manager”). Look under “Ports (COM & LPT)” or “Universal Serial Bus controllers.” The way the device appears tells you which driver chip your cutter uses:
Redsail also provides a CorelDRAW plugin called , which allows you to cut directly from CorelDRAW (versions 11 through X5) without exporting to another program. The setup involves installing a Windows printer driver for the plotter. Add your Redsail plotter model
Select the exact you noted from the Device Manager in Step 4.
If your computer doesn't automatically recognize the plotter, follow these manual steps: Connect the Plotter
Locate the driver on the original CD provided with the machine or download the latest version from the REDSAILCNC help files . Common drivers include the 340 USB Driver FTDI USB Driver Connect the Hardware
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
