Autocad Please Enter An Integer From 1 To 20000 Jun 2026

The frustration is compounded because the prompt often appears after you have moved on to another task. You might have finished typing a distance, hit Enter, and then tried to select an object, only to have this integer prompt hijack your command line.

The message explicitly states that AutoCAD is expecting an —a whole number without decimals—and that this number must fall between 1 and 20,000. The error can appear with variations on the upper limit (e.g., 30, 100), but the 1–20,000 range is one of the most common, primarily due to its association with the VIEWRES system variable.

Here is a solid guide on how to resolve this and use the correct values. autocad please enter an integer from 1 to 20000

This specific range (1 to 20,000) is most commonly associated with and Selection Settings . AutoCAD uses these limits to ensure the software doesn’t crash while trying to process too much visual data at once. The two most frequent culprits are:

If you cannot open your Options dialog, or if the error appears while navigating it, you need to reset your user settings to default. The frustration is compounded because the prompt often

For persistent issues, your next step should be to contact Autodesk technical support or seek help from an experienced CAD administrator. Provide them with the exact text of the error message and a step-by-step description of your actions leading up to it.

: Designing floor plans, sections, and technical schematics with precise measurements. 3D Modeling The error can appear with variations on the upper limit (e

The prompt is specific to a few key commands. Knowing which one you are using will help you find the right fix.

The most frequent cause of this error is the MAXHATCH system variable. To prevent your computer from freezing while rendering millions of tiny hatch lines, AutoCAD limits the number of hatch lines generated in a single operation. If you attempt to hatch a massive area with a very dense pattern, or if your hatch scale is set too low (e.g., 0.0001 ), AutoCAD will reject the input with this specific error. 2. Viewport and Linetype Scaling (LTSCALE / CELTSCALE)

Simply type a whole number between 1 and 20000. For example: