Empi 300pv User Manual Top

Manual Insight: The manual explicitly states that TENS is a symptomatic treatment. It does not cure underlying pathologies but temporarily modifies pain perception.

Choose PPR to browse factory-loaded protocols. For instance, NMES PPR 1 and PPR 2 focus on muscle re-education, while PPR 3 treats disuse atrophy in larger muscle groups.

: Toggle between Symmetrical (best for large muscle groups like quads) and Asymmetrical (ideal for isolating smaller muscle structures or targeting deep localized nerves). empi 300pv user manual top

If the device is locked (indicated by a lock symbol), press the down arrow to unlock the intensity controls. 3. Top Features: Preprogrammed Regimens & Customization

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | Dead batteries / Battery contact failure | 1. Try fresh AA alkaline batteries (e.g., Energizer or Eveready). 2. Ensure batteries are inserted correctly, matching the +/- polarity marks. | | Stimulation is weak | Old/worn/damaged electrodes / Poor electrode contact | 1. Replace the electrodes. 2. Reapply electrodes, ensuring they are firmly secured to the skin. | | Stimulation stops | Electrode placement / Lead wires old/worn | 1. Ensure electrodes are at least 2 inches apart. 2. Replace lead wires (recommended annually). | | Stimulation is uncomfortable | Intensity is too high / Electrodes too close together | 1. Decrease the amplitude (intensity). 2. Reposition the electrodes so they are at least 2 inches apart. | | Device is ON but unresponsive to button presses | Device software glitch | Disconnect all patient cables, remove the batteries, wait 10 seconds, then reinsert the batteries and resume treatment. | Manual Insight: The manual explicitly states that TENS

: Place four pads using a bracketed method directly surrounding the glenohumeral joint or rotator cuff assembly.

If a patient cannot adjust underlying wave frequencies or timing values, the unit is locked into clinician compliance mode. Follow the program lockout steps to adjust or unlock presets. For instance, NMES PPR 1 and PPR 2

: Define how many seconds it takes for the current to climb to its maximum peak. 2. Setting Up High Volt Pulsed Galvanic (HV)

Allows clinicians to lock up to 3 programs for patient safety. Special Functions Quick Guide - Medi-Stim