Cobra 3195 Alarm Manual Full ((new)) Jun 2026

High-decibel, wireless or wired battery-backed intelligent siren.

The ultrasonic sensors detected movement inside the cabin.

Are you currently dealing with a specific (e.g., random triggers)?

Disclaimer: This guide serves as a reference based on standard Cobra 3195 configurations. Vehicle-specific wiring and features may vary based on the installation date and the specific vehicle manufacturer's integration. cobra 3195 alarm manual full

Count the LED flashes for the first digit of your PIN. Turn the ignition once the count is reached, then back Repeat for the remaining three digits. Key Functions & Indicators LED Status Rapid Flashing

Arm the alarm normally using . The sensors will automatically reactivate the next time you disarm and rearm the system. Siren Mute Mode (Silent Arming)

Press and hold on the new remote control fob until the small LED on the fob stops flashing and turns off (approx. 7–10 seconds), then release them. The remote LED will turn on steadily. Disclaimer: This guide serves as a reference based

If entered correctly, the alarm will instantly stop sounding, the LED will turn off, and the engine immobilizer will disarm.

USER INSTRUCTIONS USER INSTRUCTIONS * Car Alarm Immobiliser System. Thatcham M.I.R.R.C. Evaluation No: ... * Radio Key Function. * Cobra BRIDGE Car Security System User Manual

Note: Professional installation is highly recommended for safety and warranty purposes. Key Wiring Connections Permanent +12V battery power. Black Wire: Ground (0V). Turn the ignition once the count is reached,

If your remote control fails, is lost, or suffers from local radio frequency (RF) interference, you can disarm the system using your unique 4-digit PIN code. This code is found on the plastic code card supplied with the alarm at the time of installation.

If you want to leave a pet or a passenger inside the car while keeping the perimeter (doors and hood) armed, you can temporarily disable the cabin sensors. Turn the vehicle ignition key , then OFF . Within 5 seconds, press Button B on your remote control.