Exact command syntax may vary slightly depending on MINI-LINK product generation (TN 5.x, 6.x, 7.x, or CN 5000 series). Always refer to the product-specific Ericsson MINI-LINK Operation and Maintenance Guide for your exact software release.
sync-e quality-level g.811 # PRC source interface ethernet 1 priority 1 exit
Access to the CLI is typically gained through a terminal emulator via Telnet, SSH, or a direct serial connection to the NPU unit. Default Password: Enable Privileged Mode: > enable Password: ericsson Use code with caution. Copied to clipboard Unlock Hidden Commands: (Use with caution for advanced debugging) # cliunlock Use code with caution. Copied to clipboard Essential CLI Commands Command Category Description System Info show board Displays serial, type, and software version of all boards show board 1/2 config ericsson mini link cli commands
show version — Reveals active and backup software bank versions.
The CLI is typically accessed via:
set radio tx-power : Adjusts the output power of the transmitter, typically measured in dBm.
: Switches from standard Exec Mode to Privileged Exec Mode, allowing configuration changes. Exact command syntax may vary slightly depending on
To manage a MINI-LINK node via CLI, secure access must be established through standard networking protocols.
MINI-LINK uses standard protocols like FTP or SFTP to move files. Default Password: Enable Privileged Mode: > enable Password: