You pull the out of your kit. The ruggedized rubber casing is scuffed from three years of drops into elevator shafts and ceiling tiles. You navigate to Tools > System Settings > About .
If the version numbers match, the update completed successfully. You can now restore your saved configuration profiles using the LinkRunner AT Manager by selecting . Troubleshooting Common Update Failures
Establishing a stable data connection between the PC and the tester prevents file transfer failures. Power your LinkRunner AT 2000.
Ensure your device is fully charged or connected to power during the update to prevent power failure during the flashing process. How to Check Your Current Firmware Version
Firmware updates often refine the algorithms used for Cable Verification, TruePower™ PoE testing, and 802.1X authentication. linkrunner at 2000 firmware update
Troubleshoot a (e.g., "Device not found" errors)
If you want to optimize your testing setup further, let me know: Your Any specific error codes you are seeing Whether you sync data with Link-Live cloud
The running on your computer
The LinkRunner Manager will transfer the update file to the tester's internal memory. You pull the out of your kit
Before you begin the update process, ensure you have the following:
You will need the standard USB cable supplied with your tester to connect it to your PC.
Once completed ("status 0"), select reboot system now . 4. Important Notes
Firmware updates can occasionally reset the device to factory defaults. Sync all saved profiles and local test results to the Link-Live Cloud, or export them via USB. If the version numbers match, the update completed
It’s time for the update.
: Connect the LinkRunner to your PC. On the device itself, navigate to the Tools menu, select USB Storage , and enable it. Your PC will now recognize the device as a removable flash drive.
If you encounter errors during the installation, consult this troubleshooting matrix to resolve the issue: