Download Sp Flash Tool For Windows -7 8 Or 10- And Linux !new! ●

Go to > Advanced Options > Startup Settings and click Restart .

The partition list below will automatically populate with components like boot , recovery , system , and userdata . Select your flashing mode from the dropdown menu:

Power off your Android device completely. Hold the or Volume Up key (depending on the OEM) and connect it to the PC via USB. download sp flash tool for windows -7 8 or 10- and linux

Windows 8 and 10 block unsigned MediaTek drivers by default. You must disable this security feature temporarily.

Then:

Note: Log out of your Linux session and log back in for these permission changes to take effect. Step 4: Launch the Utility

Without pressing any buttons, connect the device to your PC using the USB cable. (Note: On a few stubborn older models, you may need to hold the Volume Down or Volume Up button while plugging it in). Go to > Advanced Options > Startup Settings

The firmware package size exceeds the target partition limits on the phone. Verify you have downloaded the exact stock ROM variant built for your device model.

Ensure your phone or tablet has at least 50% battery life to prevent it from powering off mid-flash. Hold the or Volume Up key (depending on

Create a udev rule to allow the system to identify the MediaTek bootloader interface: sudo nano /etc/udev/rules.d/80-persistent-usb.rules Use code with caution. Add the following line to the file, save, and exit: