The is a service-level software that Epson technicians use. It provides access to the "Particular Adjustment Mode" for resetting the waste ink pad counter. Several versions of this program are available for the M2120 series.
Allows for inputting ID codes during printhead replacement.
: Red lights on the control panel begin flashing, preventing further printing. Popular Reset Tools
Connect your printer to a Windows or Mac computer via a . Open the software and select your Epson M2120 from the device list.
※ If you don’t physically manage the waste ink, the pad will overflow and damage the printer. Epson M2120 Resetter
: Can restore the printer to its original performance settings. 2. Recommended Software Options
The Epson Adjustment Program is almost exclusively designed to run on Windows operating systems (Windows 7, 8, 10, and 11). It does not natively support macOS or Linux.
The resetter communicates with the printer's firmware via a USB cable, allowing you to "tell" the printer that a new maintenance box or ink pad has been installed, even if you haven't replaced it physically. Key Features of the Adjustment Program:
Yes , but with two conditions:
Epson M2120 Resetter: guida rapida e file di reset
Ensure your physical ink waste pads are not actually overflowing. If ink is leaking onto your desk, you must change the pads first—resetting the counter will cause a flood.
The term "Epson M2120 Resetter" generally refers to two distinct but related tools:
Select "Waste Ink Pad Counter" and click initialization. Key Features of the Resetter The is a service-level software that Epson technicians use
Click "Check" to read the current counter. Then, check the box and click "Initialize" to reset the counter to zero. Restart: Restart the printer when prompted. Method 2: Using WIC Reset Utility Download the WIC Reset Utility and install it. Connect the printer via USB. Launch the tool, check the "Waste Ink Counter." Purchase a Reset Key from the official site. Enter the key to finish the reset process. Important Safety Measures & Requirements
This article provides a comprehensive guide on what the resetter is, how to find it, and step-by-step instructions on how to use it safely to get your printer running again. What is the Epson M2120 Resetter?
– Turn the printer off, wait a few seconds, and turn it back on normally. The error should be cleared, and the printer should function again.
The printer screen displays: "A printer's ink pad is at the end of its service life. Please contact Epson Support." Allows for inputting ID codes during printhead replacement
If you are handy with electronics, you can open the printer and clean the pads with warm water and detergent, letting them dry completely before reinserting them. If you are uncomfortable doing this, it is highly recommended to take the printer to an authorized Epson service center. They will replace the pads and reset the counter professionally.
Resetting the waste ink counter is a safe and effective DIY solution, but certain risks and legal considerations must be understood.