Type http://[IP_ADDRESS_OF_CAMERA]:80 into the address bar. For example: http://192.168.1.105:80 .

: Your personal account credentials become the master login for the camera. Legacy and Web Interface Defaults

Note: Some older firmware versions use admin / admin or admin / password . However, admin / 123456 is the most common combination.

Because of this wide distribution, the credentials are universal across thousands of devices. If you have an off-brand camera that uses Hipcam firmware, chances are high that the following credentials will work.

Plug your Hipcam into a power source and wait for the indicator light to flash (indicating pairing mode). Add Device: Tap the + or Add Device icon in the app.

Locate the physical button on your camera. It is usually a small pinhole located on the back, bottom, or near the SD card slot. Straighten a paperclip or use a SIM ejector tool.

Keep the button pressed for while the device is powered on.

Look at the bottom or back of the camera body. Safe credentials or a setup PIN are often printed next to the serial number and MAC address.

Remember: The best security camera is not the one with the highest resolution—it’s the one that hasn’t been hacked. Change your Hipcam default password today.

192.168.1.1 or DHCP-assigned (check your router network map)

Finding your Hipcam default login is a straightforward process, but it should only serve as a temporary bridge to getting your device online. By immediately upgrading to a strong password and enabling two-factor authentication, you ensure that your security camera keeps your home safe without compromising your digital privacy.

Most smart cameras only support 2.4 GHz Wi-Fi networks . If your phone is connected to a 5 GHz band, switch to 2.4 GHz during configuration.

Using the default admin login for your Hipcam device? Here’s why that’s a major security risk and how to change it in under 2 minutes.

If you are using an older, legacy Hipcam IP camera or an OEM device running Hipcam firmware, it may use standard network login protocols. If prompted for a local password via a web browser, try these common industry defaults: admin | Password: (Leave Blank) Username: admin | Password: admin Username: admin | Password: 12345 How to Log In to Your Hipcam Device