Ivoclar Programat P100 Manual English: Complete Operating Guide & Troubleshooting
Never touch the outer shroud of the heating chamber or the lower insulation platform during or immediately after a cycle. Temperatures can cause severe burns.
Sets the standby/starting temperature (typically around 400°C to 500°C). ivoclar programat p100 manual english
for data entry and a display that shows both actual and setpoint values for temperature and vacuum. Programming Versatility : It includes instructions for both standard preset programs
Ensure the furnace is placed on a flat, heat-resistant surface and is properly grounded. 3. Technical Specifications for data entry and a display that shows
: Ensure air vents are never blocked by objects or liquids to prevent electrical shock. Stomdevice 2. Setup and Connections
: Always use the provided tongs to place or remove objects from the firing chamber. Never touch the hot surface of the furnace head. Crush Risk Technical Specifications : Ensure air vents are never
Define the "Vacuum On" (V1) and "Vacuum Off" (V2) temperatures.
Measure the resistance of the muffle. If open circuit, replace the QTK muffle. Damaged Pt-Rh platinum thermocouple.
: Consult the full manual for specific error codes (e.g., vacuum loss, temperature sensor failure).
Press the key. Input the desired heating rate (e.g., 60°C/min).