My Summer Car Build | 12922607

Attach the Drive Gear to the gearbox ( 7mm wrench , 7 bolts).

Full parts list available in attached spreadsheet.

: Minor balance adjustments to oil, coolant, and brake fluid consumption rates under high engine stress. my summer car build 12922607

Using tools like MSC Save Backup Manager allows you to draft different build paths (e.g., rally vs. street) and quickly swap between them without losing progress [8]. Essential Build Checklist (Build 12922607+)

: Always disconnect the battery before installing the alternator or starter to avoid death by electrocution. Recent Mechanical Changes Attach the Drive Gear to the gearbox ( 7mm wrench , 7 bolts)

Mount the Master Brake Cylinder and the Master Clutch Cylinder to the firewall inside the engine bay ( or 9mm depending on the specific nut). Run the independent steel brake and clutch lines from the cylinders to each individual wheel hub and the transmission case.

The easiest way to see your current build is through the in-game developer console, which you can access and use as follows: Using tools like MSC Save Backup Manager allows

If any of these assumptions are wrong, proceed with the sections below; they’ll still apply to most MSC builds.

: Drop the raw coil springs into their mounts. Secure the rear shock absorbers using an 11mm wrench at the top tower and a 12mm wrench at the base.