Caraflo V200 Shower Instructions __link__ Today

Clean the chrome surface using warm, soapy water and a soft microfiber cloth.

Insert the rubber sealing washers and the mesh debris filters into the inlet nuts of the shower valve. Note: Do not skip the mesh filters, as they protect the internal seals from damage. Step 3: Mount the Valve Body

Once hand-tight, use a soft-jawed plumber’s wrench to tighten exactly further. Many users overtighten, crushing the rubber washer inside, leading to leaks or a stuck swivel.

Before beginning installation, ensure your water system matches the operational parameters of the valve. 0.5 bar Maximum Operating Pressure: 5.0 bar Recommended Pressure: 1.0 to 3.0 bar Hot Water Supply Temperature: 55°C to 65°C Cold Water Supply Temperature: 5°C to 25°C

Unlike cheaper models, the Caraflo V200 does not require a silicone sealant on the threads; over-tightening is the #1 cause of cracked housings. caraflo v200 shower instructions

For future maintenance ease, install service valves on both the hot and cold feed pipes close to the shower unit. 📐 Step-by-Step Installation Instructions

The V200 is designed for versatility and can be mounted in either a depending on your shower pod's layout.

Unscrew the cartridge retaining nut or grub screw (located on the underside or rear of the valve body).

Fully NCC Certified, WRAS Approved, and TMV2 Scheme Compliant for safety Step-by-Step Installation Instructions Clean the chrome surface using warm, soapy water

Loosen the internal plug to let trapped water escape freely from the internal thermostatic cartridge chambers.

: Frozen residual water within a thermostatic cartridge will expand. This cracks the internal nylon casing or breaks the Vernet copper capsule. You must drain the system when closing your caravan for winter.

If your lever feels stiff, do not force it. Run warm water for 30 seconds first to expand the internal seals.

: Always ensure the tap is fully drained during the winter period to avoid invalidating warranties or causing leaks. Maintenance & Troubleshooting Caraflo V200 Shower Mixer Tap Thermostatic Chrome Step 3: Mount the Valve Body Once hand-tight,

This text is a general guide for the CaraFlo V200 series. Please consult the specific technical diagram included in your product box for warranty registration and detailed plumbing schematics.

Push the cartridge back into the valve body, tighten the retaining nut/screw, and recalibrate the handle.

The is a thermostatic shower mixer valve specifically designed for static caravans and holiday homes. Since its introduction in 2013, it has become a standard fitting in many holiday home brands, including Swift, Willerby, ABI, and Victory . Installation Instructions

Rotate this knob clockwise or counterclockwise (depending on your specific layout orientation) to initiate water flow. Turn it fully to maximize the water pressure. Rotate it back to the original position to shut off the water completely. Adjusting the Temperature