: When using the 2.4GHz wireless mode, the scanner is pre-paired with the USB dongle from the factory. If you need to re-pair, scan the "Match" barcode found on the included setup card.
NadaMoo Barcode Scanner YHD-5100 Manual: Setup, Configuration, and Troubleshooting Guide
18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_10;56; 18;write_to_target_document7;default0;1e1;
Most standard settings require only a single scan of the target barcode. Advanced settings (like custom prefixes) require a sequence: Enter Setup →right arrow Function Code →right arrow Save/Exit Setup .
Unplug the USB cable, restart the computer, and plug it into a different USB port (preferably a rear port if using a desktop PC). nadamoo barcode scanner yhd-5100 manual
If in inventory mode, memory might be full. If in normal mode, the scanner is out of wireless range. Move closer and re-pair. Low battery.
He pulled the trigger again.
Issue: The scanned characters are incorrect or scrambled (e.g., symbols instead of numbers).
In his right hand sat the object of his professional life: the Nadamoo YHD-5100. : When using the 2
Here are some of the most common settings you'll want to configure:
Ensure the USB receiver is securely plugged into a working port. Scan the barcode. Scanner emits 3 short beeps when scanning. Connection failure or full memory.
Connect the scanner to your computer using the provided USB cable.
Scan any product barcode. If the data appears at the cursor, the device is working. 0;2a; Advanced settings (like custom prefixes) require a sequence:
The device is powered by a 32-bit ARM high-speed processor, which ensures fast decoding capabilities and reliable performance, even for damaged or low-quality barcodes.
The NadaMoo YHD-5100 features plug-and-play functionality, meaning it requires no special drivers or software installations on modern operating systems. Step-by-Step Setup
1. Ensure the USB cable is fully seated in both the PC and the base of the scanner.2. Try a different USB port on the back of the motherboard.3. Check if the top LED indicator is illuminated.
If the scanner requires re-configuration, use the following logic typically found in the User Manual Pairing Mode : If the scanner loses connection to the dongle, scan the barcode, then re-insert the USB receiver within 30 seconds. Operating Modes Instant Upload Mode : (Default) Scanned data is sent to the PC immediately. Storage Mode